400g/Lasulam(present as the sodium salt)
Domestic Use |
||For control of bracken fern in pastures; grasses in sugar cane, and a range of weeds and grasses in crops and pastures.
DO NOT apply by aircraft (except for sugar cane).
DO NOT apply if rain is expected within 3 hours (24 hours for bracken).
Note: The performance of TITAN Asulam 400 Herbicide may be reduced if mixed with water which has a pH of less than 6.
Half fill spray tank with clean water. Add the required amount of product to the spray tank and top up to required volume with water. Thoroughly agitate before applying. When using high volume applications, maintain agitation during application.
DO NOT leave prepared spray in the tank overnight.
If sprays are prepared in a bulk mixing tank at a central point, always stir thoroughly before drawing from the tank. Except for bracken control and sugar cane use, DO NOT add a wetting agent or crop damage may result.
Boom Sprayer: Apply a minimum of 100 litres of water per hectare. Aerial Application: Apply a minimum of 28 litres per hectare (lower rates have not been tested).
DO NOT apply tank mixes from aircraft.
Carpet Wiper: Calibrate the wiper equipment by adjusting the flow rate and tractor speed to ensure the herbicide is delivered at the recommended rate. For 25 litre tank, the following rates can be used to deliver the recommended rate of TITAN Asulam 400 Herbicide per hectare.
TITAN Asulam 400 Herbicide - 4.0L
BP Ulvapron* - 0.5L
Water - 20.5L
Speed of Travel - 10km/hr
Flow Rate - 1L/min
This product is compatible in the spray tank with Actril* DS,Wetspray 1000, BP Ulvapron*, ethofumesate and atrazine. Mixtures should not be left overnight before spraying. As formulations of other manufacturers' products are beyond the control of TITAN AG Pty Ltd, all mixtures should be tested prior to mixing commercial quantities.
Resistant Weeds Warning
TITAN Asulam 400 Herbicide is a member of the Carbamate group of herbicides and has diverse sites of action. For weed resistance management TITAN Asulam 400 Herbicide is a Group K herbicide. Some naturally occurring weed biotypes resistant to TITAN Asulam 400 Herbicide and other Group K herbicides may exist through normal genetic variability in any weed population. The resistant individuals can eventually dominate the weed population if these herbicides are used repeatedly. These resistant weeds will not be controlled by TITAN Asulam 400 Herbicide or other Group K herbicides.
Since the occurrence of resistant weeds is difficult to detect prior to use, TITAN AG Pty Ltd accepts no liability for any losses that may result from the failure of TITAN Asulam 400 Herbicide to control resistant weeds.
Protection of Crops, Native and Other Non-target Plants
DO NOT apply under weather conditions or from spraying equipment that may cause spray to drift onto nearby susceptible plants/crops, cropping lands or pastures.
Protection of Wildlife, Fish, Crustaceans and Environment
DO NOT contaminate streams, rivers or waterways with the chemical or used containers.
Store in the closed original container in a dry, well-ventilated area, as cool as possible. DO NOT store for prolonged periods in direct sunlight. Wash the spraying equipment thoroughly before and after use.
Triple or (preferably) pressure rinse containers before disposal. Add rinsings to the spray tank. DO NOT dispose of undiluted chemicals on-site. Break, crush or puncture and bury empty containers in a local authority landfill. If not available, bury the containers below 500 mm in a disposal pit specifically marked and set up for this purpose clear of waterways, vegetation and roots. Empty containers and product should not be burnt.
Avoid contact with eyes and skin. DO NOT inhale spray mist. If product on skin, immediately wash area with soap and water. After use and before eating, drinking or smoking, wash hands, arms and face thoroughly with soap and water.
If poisoning occurs, contact a doctor or Poisons Information Centre. Phone Australia 13 11 26.
Product details last updated on 23 Aug 2012
DISCLAIMER: This is not the ASULAM 400 label. To view or print the label for this product, click the "MSDS/Label" tab at the top of this page. Always follow label instructions.
For specialist advice in an EMERGENCY only phone , TOLL-FREE, ALL-HOURS, NATIONWIDE