Titan Ag


Product Details
Back | Back To Search | Printable version

APVMA Code :62641
Active Constituent(s):
200g/Lbromoxynil(present as the n-octanoyl ester)
200g/LMCPA(present as the ethyl hexyl ester)
Registered For
Commercial Use Domestic Use

Overview For the control of weeds in wheat, oats, barley, cereal rye, triticale, linseed, grass pastures and turf.
Chemical Group hydroxybenzonitrile + phenoxyaliphatic
General Instructions Before opening, carefully read Directions for Use, Precautionary and Protection Statements, Storage and Disposal, Safety Directions and First Aid Instructions.

To ensure even mixing, half fill spray tank with clean water and add the required amount of this product. Agitate thoroughly, then add the remainder of water. Agitate again before spraying commences.

DO NOT use rain-drop or air-induction nozzles as coverage of weeds may not be adequate.
Boom Sprayer: Calibrate the machine before use to ensure that the correct application rate is obtained. Check height of boom above the crop to ensure that the spray is evenly distributed.
Cereals: Apply 50 to 200 litres of water per hectare. Use higher water volume (min. 100L/ha) where the weed infestation is heavy, the crop cover is dense or when tank-mixing with metsulfuron-methyl. Complete coverage of weeds is essential.
Linseed: Apply a minimum of 220 Litres of water per hectare.
Turf: Apply a minimum of 500 Litres of water per hectare.
Aerial Application: Apply a minimum of 22 Litres of water per hectare or 30 litres of water per hectare if tank-mixing with metsulfuron-methyl. Markers should always move upwind before aircraft passes overhead. Application by micronaire equipment may give variable results.

Cleaning Spray Equipment
After use wash application equipment thoroughly with Spraymate Tank & Equipment Cleaner and rinse several times.

This product is physically compatible in the spray tank with one of the following herbicides or insecticides in wheat and barley only.
Diclofop-methyl, metsulfuron-methyl, dicamba 500, MCPA, dimethoate, omethoate, endosulfan or chlorpyrifos. When mixed with metsulfuron-methyl or dicamba 500, do not apply to cereals undersown with lucerne. When mixed with diclofop-methyl, do not exceed 1.4 litres of this product per hectare. Observe all instructions on the mixture partner label. As formulations of other manufactures? products are beyond the control of TITAN AG Pty Ltd, all mixtures should be tested prior to mixing commercial quantities.

Resistant Weeds Warning
TITAN Bromoxynil MA Selective Herbicide is a member of both the nitriles and the phenoxys groups of herbicides. TITAN Bromoxynil MA Selective Herbicide has both the inhibitors of photosynthesis at photosystem II and disruptors of plant cell growth mode of action. For weed resistance management TITAN Bromoxynil MA Selective Herbicide is a Group C and Group I Herbicide.
Some naturally-occurring weed biotypes resistant to TITAN Bromoxynil MA Selective Herbicide and other Group C and Group I herbicides may exist through normal genetic variability in any weed population. The resistant individuals can eventually dominate the weed population if these herbicides are used repeatedly. These resistant weeds will not be controlled by this product or other Group C and Group I herbicides.
Since the occurrence of resistant weeds is difficult to detect prior to use, TITAN AG Pty Ltd accepts no liability for any losses that may result from the failure of TITAN Bromoxynil MA Selective Herbicide to control resistant weeds.

Protection of Crops, Native and Other Non-target Plants
DO NOT apply under weather conditions, or from spraying equipment, that may cause spray to drift onto nearby susceptible plants/crops, cropping, lands or pastures. Avoid spray drift and vapour movement onto susceptible crops such as cotton, tobacco, tomatoes, vines, lupins, fruit trees and ornamentals.
DO NOT apply by misting machines.
Note: Maximum daily temperatures at or above 200C at application, or on days following treatment, may result in seedling mortality and established plants may be damaged.

Protection of Wildlife, Fish, Crustaceans and Environment
Dangerous to fish. DO NOT contaminate streams, rivers or waterways with the chemical or used containers.

Protection of Livestock
Grazing Precaution
Sprayed weeds may become more palatable to stock and a higher intake of some weeds may result in stock poisoning and death from causes such as nitrate poisoning. Care should be taken especially where Capeweed, Paterson?s Curse and variegated thistles predominate in the pasture. Avoid grazing with young or breeding stock.
DO NOT graze horses or pigs on Paterson's curse. If in doubt, contact your nearest Department of Agriculture.

Store in closed, original container in a cool, well-ventilated area. DO NOT store for prolonged periods in direct sunlight.

(5L, 20L only)
Triple or preferably pressure rinse containers before disposal. Add rinsings to spray tank. DO NOT dispose of undiluted chemicals on site. If recycling, replace cap and return clean containers to recycler or designated collection point. If not recycling, break, crush or puncture and bury empty containers in a local authority landfill. If no landfill is available, bury the containers below 500mm in a disposal pit specifically marked and set up for this purpose clear of waterways, desirable vegetation and tree roots. Empty containers and product should not be burnt.
Envirodrum 110L Mini Bulk Returnable Container:
DO NOT tamper with the Micro Matic valve or the security seal. DO NOT contaminate the Envirodrum with water or any other foreign matter. After each use of the product, please ensure that the Micro Matic coupler, delivery system and hoses are disconnected, triple rinsed with clean water and drained accordingly. When the contents of the Envirodrum have been used, please return the empty Envirodrum to the point of purchase. The Envirodrum remains the property of TITAN AG Pty Ltd.
Refillable containers 120L, 220L:
Add rinsings to spray tank. DO NOT dispose of undiluted chemicals on site. The drums remain the property of TITAN AG Pty Ltd.
Refillable containers (1000L only):
Empty contents fully into application equipment. Close all valves and return to point of supply for refill or storage.

Safety Directions
Product is poisonous if inhaled or swallowed. Attacks the eyes and will irritate the skin. Avoid contact with eyes and skin. DO NOT inhale spray mist. When preparing the spray and using the prepared spray wear cotton overalls buttoned to the neck and wrist, a washable hat and elbow-length PVC gloves and face shield or goggles. If product in eyes, wash it out immediately with water. After use and before eating, drinking or smoking, wash hands, arms and face thoroughly with soap and water. After each day's use, wash gloves, face shield or goggles and contaminated clothing.

First Aid
If poisoning occurs, contact a Doctor or Poisons Information Centre. Phone Australia 13 11 26.

DO NOT spray if weeds are wilted by dry or cold weather or if crops are at a susceptible stage, or if rain is likely within 4 hours.
DO NOT apply if frosts are imminent.
DO NOT apply to diseased or frost affected crops or turf.

Product details last updated on 23 Aug 2012

DISCLAIMER: This is not the BROMOXYNIL MA SELECTIVE HERBICIDE by TITAN label. To view or print the label for this product, click the "MSDS/Label" tab at the top of this page. Always follow label instructions.

For specialist advice in an EMERGENCY only phone , TOLL-FREE, ALL-HOURS, NATIONWIDE