Domestic Use |
||For the control of certain fungal diseases in various crops and situations.
||Fungicide Resistance Warning
TITAN Iprodione Aquaflow 500 Fungicide is a member of the dicarboximide group of fungicides. For fungicide resistance management the product is a Group 2 fungicide. Some naturally occurring individual fungi resistant to the product and other Group 2 fungicides may exist through normal genetic variability in any fungal population. The resistant individuals can eventually dominate the fungal population if these fungicides are used repeatedly. These resistant fungi will not be controlled by this TITAN Iprodione Aquaflow 500 Fungicide or other Group 2 fungicides, thus resulting in a reduction in efficacy and possible yield loss.
Since the occurrence of resistant fungi is difficult to detect prior to use, TITAN AG Pty Ltd accepts no liability for any losses that may result from the failure of this product to control resistant fungi.
Export of Treated Produce
Growers should note that MRLs or import tolerances may not exist in all markets for produce treated with TITAN Iprodione Aquaflow 500 Fungicide. If you are growing produce for export, please check with TITAN AG Pty Ltd for the latest information on MRLs and import tolerances BEFORE using TITAN Iprodione Aquaflow 500 Fungicide.
Note: TITAN Iprodione Aquaflow 500 Fungicide may be unstable in conditions where the pH is 7 or higher. It is therefore essential to check the pH of the spray solution before adding TITAN Iprodione Aquaflow 500 Fungicide. A suitable registered buffering agent may have to be added to bring pH down below 7. Add half the required water volume to the spray tank or vat with the agitation mechanism operating. Add the required volume of this product and then add additional water to the volume required.
Good disease control requires even, thorough coverage of the target area. Application should be made using appropriate spray equipment and sufficient water to provide adequate penetration and coverage. Equipment settings and water volume may need to vary, depending on the growth stage of the crop.
Tree and Vine Crops
Dilute Spraying: Use a sprayer designed to apply high spray volumes, up to the point of run-off and matched to the crop being sprayed. Set up and operate the sprayer to achieve even coverage throughout the crop canopy. Apply sufficient spray solution to cover the crop to the point of run-off. Avoid excessive run-off. The required spray volume to achieve point of run-off may be determined by applying different test volumes, using different settings on the sprayer, from industry guidelines or expert advice. Add the amount of product specified in the Directions For Use table for each 100L of water. Spray to the point of run-off. The required dilute spray volume to achieve point of run-off will change and the sprayer set up and operation may also need to be changed, as the crop grows. Concentrate Spraying: Use a sprayer designed and set up for the concentrate spraying (that is a sprayer which applies spray volumes less than those required to reach the point of run-off) and matched to the crop being sprayed. Set up and operate the sprayer to achieve even coverage throughout the crop canopy using your chosen water volume. Determine an appropriate dilute spray volume (See Dilute Spraying above) for the crop canopy. This is needed to calculate the concentrate mixing rate. The mixing rate for concentrate can then be calculated in the following way:
1. Dilute spray volume as determined above: For example 1500L/ha.
2. Your chosen concentrate spray volume: For example 500L/ha.
3. The concentration factor in this example is: 3x (ie 1500L / 500L = 3).
4. If the dilute label rate is 10mL/100L, then the concentrate rate becomes 3 x10, that is 30mL/100L of concentrate spraying.
The chosen spray volume, amount of product per 100L of water, and the sprayer set up and operation may need to be changed as the crop grows.
For further information on concentrate spraying, users are advised to consult relevant industry guidelines, undertake appropriate competency training and follow industry Best Practices.
TITAN Iprodione Aquaflow 500 Fungicide is compatible with the following products: Aliette* WG, Bugmaster* Flowable, calcium chloride, chlorpyrifos 500 EC, copper oxychloride, dimethoate, Dithane*, Dithane* M-45, endosulfan, Kelthane* EC, maldison, metalaxyl, methomyl or parathion-methyl.
When tank mixing products the order of mixing is determined by formulation type. As a guide the following mixing sequence is recommended.
1. Wettable powders
2. Suspension concentrates
3. Water Dispersible Granules
4. Suspo-emulsions (eg. TITAN Iprodione Aquaflow 500 Fungicide)
5. Soluble powders
7. Emulsifiable concentrates
8. Soluble concentrates
9. Wetting agents and oils
With any mixture, thoroughly agitate immediately before applying. It is not recommended to mix this product with more than one of the above chemicals in the tank. The use of a surfactant or spray oil is not recommended with TITAN Iprodione Aquaflow 500 Fungicide as it may result in crop damage to sensitive plants. DO NOT mix with fertilisers.
Note: Mixing TITAN Iprodione Aquaflow 500 Fungicide with Aliette WG may result in some settling out. As formulations of other manufacturer?s products are beyond the control of TITAN AG Pty Ltd, all mixtures should be tested prior to mixing commercial quantities.
Protection of Crops, Native and Other Non-target Plants
DO NOT apply the products under weather conditions, or from spraying equipment that may cause spray drift onto nearby plants/crops, cropping lands or pasture.
Protection of Wildlife, Fish, Crustaceans and Environment
Toxic to aquatic organisms. DO NOT contaminate streams, rivers or waterways
with chemical or used containers.
KEEP OUT OF REACH OF CHILDREN. Store in the closed, original container in a cool, well-ventilated area. DO NOT store for prolonged periods in direct sunlight.
For Non-Refillable Containers: Triple or preferably pressure rinse containers before disposal. Add rinsings to spray tank. DO NOT dispose of undiluted chemicals on site. If recycling, replace cap and return clean containers to recycler or a designated collection point. If not recycling, break, crush or puncture and bury empty containers in a local authority landfill. If no landfill is available, bury the containers below 500 mm in a disposal pit specifically marked and set up for this purpose, clear of waterways, desirable vegetation and tree roots. Empty containers and product should not be burnt.
For Refillable Containers: Storage must be secure so that contents cannot be tampered with. All locks and/or seals must be in order. If locks or seals are broken prior to initial use then the integrity of this product cannot be assured. If this occurs TITAN AG Pty Ltd should be advised immediately. Empty contents fully into application equipment. Close all valves and return to point of supply for refill or storage.
May irritate the eyes. Avoid contact with eyes and skin. When opening the container and using the product wear cotton overalls buttoned to the neck and wrist (or equivalent clothing), elbow-length PVC gloves and face shield. If product on skin, immediately wash area with soap and water. After use and before eating, drinking or smoking, wash hands, arms and face thoroughly with soap and water. After each day's use, wash gloves, face shield and contaminated clothing.
If poisoning occurs contact a doctor or Poisons Information Centre. Phone Australia 13 11 26.
Product details last updated on 23 Aug 2012
DISCLAIMER: This is not the IPRODIONE AQUAFLOW 500 FUNGICIDE label. To view or print the label for this product, click the "MSDS/Label" tab at the top of this page. Always follow label instructions.
For specialist advice in an EMERGENCY only phone , TOLL-FREE, ALL-HOURS, NATIONWIDE